TEXTURED Calfskin REVERSIBLE Belt Strap for SALVATORE FERRAGAMO Buckles: COLOR choice

  • Custom Order
TEXTURED Calfskin REVERSIBLE Belt Strap for SALVATORE FERRAGAMO Buckles: COLOR choice View Full Size
TEXTURED Calfskin REVERSIBLE Belt Strap for SALVATORE FERRAGAMO Buckles
.
No kind of agreement, license or business link were made between Casanova1948 and the named brands (Hermes, Montblanc, Louis Vuitton, Gucci, Salvatore Ferragamo, Cartier, Tiffany & Co.) or any other business or fashion company owning any of the brands shown in the images of this product: photographed buckles, compositions and illustrations are only intended to properly inform the consumer about the use or purpose of the accessory, its compatibily as well as its main features.
All trademarks, names and designer buckles models are property of the respective companies.
Google QRcode

Reversible Full-grain TEXTURED Italian Calfskin Strap replacement for SALVATORE FERRAGAMO Buckles, Leather Color of your choice on both sides, tapered-tip strap, default tonal edge stitching or optional custom stitching colors. We will let you keep and reuse your precious SALVATORE FERRAGAMO buckle.

Our Textured Calfskin Belt Straps are fully compatible with all types of SALVATORE FERRAGAMO Buckles. They are made-to-order to specifically fit your current SALVATORE FERRAGAMO Buckle, being it Stitched, Clip-on (Clamp), Screw-in, Screw-hold, Press-stud and Snap-on Buckles with Pin as per examples below:

Type of Buckles compatible with Salvatore Ferragamo Textured Calfskin Belt Straps

For guaranteed results and to provide you with a ready-to-wear belt, you will need to send in your buckle: complimentary express shipping is on us !
A prepaid shipping label will be e-mailed to you within 24 hours of purchasing your belt.

Please refer to our belt sizing guide to assure correct sizing before placing your order.

Customer questions & answers

Our leather goods are custom order only : they are handcrafted according to your specifications. Please allow 7 - 10 business days for your bespoke leather good to be made and dispatched to you.

CUSTOMIZE YOUR PRODUCT:
REQUIRED OPTIONS:
Belt Size

To choose the size for your new belt, please first refer to our BELT SIZING GUIDE and follow the instructions carefully to get accurate measurements before placing your order.

Outside Textured Leather Color

This is the side that others see and it can be designed with the color of your choice.

IMPORTANT !
Depending on our current stock at the time of your custom order, we always guarantee a choice among several best selling colors which can be available EITHER with Soft Grain Pebbled Calfskin OR Saffiano Printed Calfskin.

BLACK
Inside Textured Leather Color

The inside color is the color not seen by most people. However this too can be designed in the color of your choice as it can be worn on the reverse, thus giving you a second color option to match your outfit.
Nevertheless please do keep in mind that the stitching itself due to its peculiar process has a front and a reverse side so the appearance will slightly differ and this is why the stitching color on the reverse always matches the leather color.

OTHER OPTIONS:
Outer Stitching Color
Embossing

Availability: CUSTOM ORDER

X

How to Measure Your Belt Size

to watch the Video Guide click here

To get the best fit when buying a belt on-line, it is important to select the correct size based upon an accurate measurement. Your belt size is not the same as your pants or waist size. Because your belt goes around you and your pants, your tucked in shirt, and your underwear, your belt size is usually one or two inches larger than your pants or waist size.

What we are trying to determine here is your BELT SIZE, i.e. the size to use for length when placing your order. The BELT LENGTH from end to end is not considered for measurement purposes because it also includes the width of the buckle itself plus a few additional inches of leather that every belt must have to the left of the buckle once it’s fastened.
From the last (widest) punched hole to the very end of the strap tip, a belt should measure 10cm / 4 inches for standard belts with five holes and 12,5cm / 5 inches for those with three holes (Hermes style). As a rule of thumb, when in the widest belt hole, the bes belt should be long enough to tuck the belt tip under your first belt loop.

When it comes to measuring your belt size, there are different options according to your wearing habits and belt/buckle types.

OPTION 1 – using your EXISTING BELT

Using a belt that you already have, put it on and make a note of the hole that fits you comfortably:
 
  1. ON BELT STRAPS with DETACHABLE BUCKLES, just remove the buckle and tape measure the distance between the buckle hole ( A ) where the prong goes, all the way to your favorite hole ( B ).
  2. ON STANDARD BELTS, carefully stretch out the belt on a flat surface and, depending on the buckle type you have, tape measure from either the prong or the inside of the buckle where the buckle tongue ends ( C ), to whichever hole is currently being used ( D ) as shown below. Basically, the measurement you need to provide us with will be the sum of two dimensions: the “BELT SIZE” (the length from the fold in the leather belt to the main hole you will use) PLUS the “BUCKLE LENGTH” (the length from the fold in the leather belt to the hook in the buckle).
This establishes optimum sizing (length) and will be the middle hole (out of five) of your new belt.
Belt Size Detachable Buckle Explained
Belt Size Standard Buckle Explained

By using this method, you can be 100% confident that your new belt will fit you perfectly. Furthermore, in most cases it will let you save your old buckle (unless sewn on the strap) and use it on your new belt (if the buckle is detachable).

On your new belt, that same dimension will be the measurement from where the buckle attaches to the belt to the center hole. From this center hole most of our belts (except for Hermes style straps with 3 total holes) have two punched holes longer (at one inch increments) and two punched holes shorter (at one inch increments); this arrangement gives you the widest relevant range in adjusting your belt.

OPTION 2 – withOUT Belts –

Measuring your body circumference

Making Sure you are NOT wearing a belt while doing this, put a measuring tape through your pant/skirt loops and wrap it around your waist. Because you don’t want your new belt to interfere with your breath, inhale deeply and then measure your girth. This measures your bodily circumference. This is the measurement you need to provide when ordering your new belt.

 

OPTION 3 – withOUT Belts –

Measuring your waist

Tape measure your waistline according to where you intend to wear the belt ( waist, hips or somewhere in between ):

  1. MID / REGULAR WAIST: measure around your natural waistline
  2. LOW WAIST: measure around 2-3 inches below your natural waistline, where low-rise pants would fall;
  3. HIGH WAIST: measure around 2-3 inches above your natural waistline;

For more accurate sizing, we strongly suggest you to take your measurements WITHOUT wearing garments and eventually add one or two inches. The size to use for length when placing your belt order will equal your bodily circumference PLUS the girth of your underwear, shirts, pants or skirt.

OPTION 4 – withOUT Belts –
(for MEN ONLY!! – LADIES: please disregard this section and follow directions on Option 2 or 3)

Based on your pants size, pick your belts one or two sizes larger to get a good fit: if you wear a 36” trouser waist, a belt labeled 38"-40” will probably be in the right neighborhood. Remember, the 38”-40" will be the measurement from where the buckle connects to the belt to the hole currently being used. This works some of the times, but it is not the most accurate way.

Because sizing varies with different methods, it is recommended you don't order the size taken from another belt without measuring it first.

Casanova1948 How to measure your belt size v3.0 PDF version

Casanova1948
  • Buckle Compatibility: Ferragamo Buckles
  • Gender: Unisex
  • Craftsmanship: 100% Made in Italy
  • Leather Type: Full-Grain Textured Calfskin
  • Leather Color: customer's choice
  • Leather Finish: Matte
  • Leather Tanning: Chrome-tanned
  • Leather Origin: Italian Alpine Region
  • Belt Type: Reversible

  • Reference: RE-SF-RE-162-CA

$ 298.00

Free Google QRcode module from Mediacom87

Belt Buckle Types

  • Stitched Buckles STITCHED BUCKLES
    COMMON USE: STANDARD (SINGLE SIDE) BELTS
    This is the most common belt, where the buckle is folded and then secured by stitching.
  • Snap-on Anchor Buckle ANCHOR (SNAP-ON) BUCKLES
    COMMON USE: REVERSIBLE BELTS
    It is fastened by inserting the strap onto the buckle back loop and securing the pin in the buckle hole.
  • Clip on (Clamp) Buckle CLIP-ON (CLAMP) BUCKLES
    COMMON USE: REVERSIBLE and STANDARD (SINGLE SIDE) BELTS
    The clamp buckle uses a piece (with rotating mechanism in reversible belts) with teeth to clamp onto the end of the belt.
  • Screw-in Buckle SCREW-IN BUCKLES
    COMMON USE: REVERSIBLE and STANDARD (SINGLE SIDE) BELTS
    The screw-in buckle uses two or more screws to secure the buckle onto the belt.
  • Screw Hold Buckle SCREW-HOLD BUCKLES
    COMMON USE: STANDARD (SINGLE SIDE) BELTS
    This belt, commonly used by Designer Brands, features an open end which is cut-to-size and then secured to the buckle by one or more screws.
  • Press-stud Buckle PRESS-STUD BUCKLES
    COMMON USE: STANDARD (SINGLE SIDE) BELTS
    This belt type is very similar to the stitched buckle with the exception that the detachable buckle is folded and secured by press-studs.

Textured Soft-grain Calfskin e Textured Printed Calfskin

Our Belts, Replacement Belt Straps, Wallets and Accessories are exclusively handcrafted using top quality Full-grain Calfskin Leather, i.e. the first choice available on the market.

Depending on our current stock at the time of your custom order, we always guarantee a choice among several best selling colors which can be available EITHER with Textured Soft-grain Pebbled Calfskin OR Textured Printed Calfskin.
 

Textured Soft-grain Pebbled Calfskin

Soft-grain Calfskin LeahterTannage: classic chrome tanning, vegetable retanningGrain structure: milled, pronounced grain effectYield: The surface offers excellent cutting values
Dyeing: drum dyedSubstances: 1.8-2.0mm | 2.0-2.2mmFinishing: Semianilin

Textured Printed Calfskin

Textured Calfskin LeahterTannage: classic chrome tanning, vegetable retanningGrain structure: printedYield: The surface offers excellent cutting values
Dyeing: drum dyedSubstances: 1.2-1.4mmFinishing: printed double ironed finish

Data Sheet: TEXTURED Calfskin REVERSIBLE Belt Strap for SALVATORE FERRAGAMO Buckles: COLOR choice

Buckle Compatibility :Ferragamo Buckles
Gender :Unisex
Craftsmanship :100% Made in Italy
Leather Type :Full-Grain Textured Calfskin
Leather Color :customer's choice
Leather Finish :Matte
Leather Tanning :Chrome-tanned
Leather Origin :Italian Alpine Region
Belt Type :Reversible

Have a question ?


questions James on 20/12/2017
Question: 

Is it mandatory to ship the buckle for Ferragamo Replacement Straps ?

Answer: 

Unfortunately there is no standard width or thickness, nor punched hole shape on Ferragamo buckles.
That's why to ensure full compatibility and a perfect fit, the workshop requires to have the original buckles handy to handcraft the strap(s).


If we don’t have the buckle we generally need:
Strap width
Strap Thickness
No. of punched holes
Punch hole diameter
Distance from last hole to belt tip
Strap total lenght
Belt Tip shape
Edge Stitching Color if stitching is requested


The best thing to do would be to free ship your buckle/s (and strap, which would eventually be returned of course) to us, as we would feel more confident in obtaining all the specs we need straight from the buckle.


The THICKNESS is was we are mostly concerned: if the custom strap is too thick, it won't fit in the buckle, while if it is not thick enough, it will slide easily out of the buckle when pulling the belt tip to fasten it on the prong. The most important part you need to be exact on the thickness is the end opposite to the tip where the strap slides into the buckle. Also a measurement and a picture of the buckle thickness allowance and width allowance would help to avoid mistakes.


If you are still unwilling to ship the buckle, the only instrument to be certain about width and thickness (not taken from the strap but measured on the buckle itself) would be a digital caliper. You can get one on amazon here:
https://www.amazon.com/Electronic-Digital-Caliper-Feeler-Included/dp/B01EEH677Y/ref=sr_1_20?s=industrial&ie=UTF8&qid=1503111864&sr=1-20-spons&keywords=digital+caliper&psc=1


OR here:
https://www.amazon.com/Neiko-01407A-Electronic-Digital-Caliper/dp/B000GSLKIW/ref=zg_bs_2476630011_1?_encoding=UTF8&psc=1&refRID=PABXPSEV3R79A62C88V4


OR ANYWHERE ELSE ON THE WEB
The first one comes with a thickness gauge, the second one doesn't. They both work in imperial and metric, the first one is calibrated to lower fractions, meaning is more precise.

Have a question ?





* Required fields
Send

The question has been correctly sent